Connecting The Power Cable; Turning On/Off The Unit - Yamaha MX-A5200BL Owner's Manual

Using a Y-shaped lug connector
a Loosen the speaker terminal.
b Insert the Y-shaped lug connector into the groove between the knob and base part of the
terminal.
c Tighten the terminal.
b b
Use a Y-shaped lug with
the following size.
a a
6.5 mm
(0.26 in)
or more
16
Connections
En
c c

Connecting the power cable

After all the connections and switch operations are complete, connect the supplied power cable
to the unit and then to an AC wall outlet.
The unit (rear)
SURROUND
ASSIGN CH.4 AMP ASSIGN CH.6 AMP ASSIGN
CH.3
CH.3 BRIDGE CH.5
BRIDGE
CH.4
( )
FRONT
CH.2 CH.4 CH.6
PRESENCE
SURROUND FRONT REAR
BACK PRESENCE PRESENCE
L L L
BRIDGE A
( )
CH.3
FRONT
B
CH.2
SURROUND
AC IN BACK
To an AC wall outlet

Turning on/off the unit

Press z (power) to turn on/off the unit.
When the unit is turned on, the power indicator lights up.
The unit (front)
z (power)
• When an external device is connected to the TRIGGER IN jack, the unit is set to standby mode after z (power) is
pressed. If you turn on the external device, the unit automatically turns on by the trigger function (p.18).