Yamaha DSP-Z11 Owner's Manual page 120

Advanced setup
See page 119 for the operation of the advanced setup.
■ Cooling fan operation mode
Use this feature to set the operation of the cooling fan of this unit.
Choice
AUTO Select this setting to set the fan to operate automatically
according to the temperature of this unit.
CONT. Select this setting to set the fan to activate continuously
regardless of the temperature of this unit.
■ Bi-amplifier mode
Use this feature to activate or deactivate the bi-amplifier function.
Choice
ON Select this setting if you want to activate the bi-amplifier
function.
OFF Select this setting if you want to deactivate the bi-
amplifier function.
Note
When "BI-AMP" is set to "ON", the SUR.BACK/BI-AMP terminals cannot be used to
connect surround back speakers in that the SUR.BACK/BI-AMP terminals are already
used for the bi-amplifier connection (see page 27).
■ Pre-amplifier mode
Use this feature to select whether you use this unit as the pre-amplifier in the
main zone and use all the internal amplifiers for the other zones.
Choice
ON Select this setting when you use this unit as the pre-
amplifier in the main zone. The audio signals for the
main zone are only output at the PRE OUT jacks of this
unit. You can assign all speaker terminals for the other
zones.
OFF Select this setting to use the internal amplifiers of this
unit for the main zone, Zone 2, Zone 3, or Zone 4.
■ Recovery and backup of the system settings
RECOV./BACKUP
Use this feature to save and restore the settings of this unit.
Choice
RECOVERY Restoring the saved setting of this unit.
BACKUP Saves the current settings of this unit.
CANCEL
Cancels the recovery or backup of the settings of this
unit.
Notes
• This unit does not save the preset network/USB items, and system memory settings.
• If no settings are saved, you cannot select "RECOVERY".
■ Parameter initialization
Use this feature to reset the parameters of this unit to the initial factory
settings. You can select the category of parameters to be initialized.
Choice
DSP PARAM Select this setting to initialize all the parameters of
the sound field parameters (see page 77).
VIDEO Select this setting except "Short Message" and "On
Screen" (see page 90).
NETWORK Select this setting except "Short Message" and "On
Screen" (see page 90).
ALL Select this setting to initialize all the parameters of
this unit.
CANCEL Select this setting to cancel the initialization
procedure.
120
En
FAN MODE
Descriptions
BI-AMP
Descriptions
PREAMP MODE
Descriptions
Select
INITIALIZE
Descriptions
Notes
• Use "Initialize" in the sound field program menu to initialize the parameters of the
desired program (see page 81).
• When the network settings are reset, "DHCP" in "Network" is automatically set to
"On" (see page 92) and the registered client ID of this unit on your Yamaha MCX-
2000 is cleared (see page 68).
■ MAC address filter
Use this feature to filter the access to this unit via LAN to control this unit
by the MAC address of the accessing PC (see page 101).
Choice
ON Only allows to accept the access from the PC whose
MAC address is registered to this unit.
OFF
Allows to accept the access from any PC.
y
You can register the MAC address that is allowed to access when "MAC FILTER" is set
to "ON" by using the Web browser (see page 101).
■ TV format
TV FORMAT
Use this feature to set the color encoding format of your television.
Choices: NTSC, PAL
Initial setting:
[General and Korea models]: NTSC
[Other models]: PAL
Note
This setting is applied to the video monitor in the main zone, Zone 2, Zone 3, and Zone
4.
■ HDMI monitor check
Use this feature to activate or deactivate the monitor check function of this
unit.
Choice
YES This unit receives the information of the available video
signal resolutions from the video monitor connected via
HDMI and you can only select the resolutions supported
by the video monitor in "HDMI Resolution" (see
page 90).
SKIP You can select any resolution in "HDMI Resolution".
■ Language
LANGUAGE
Use this feature to select the language of your choice that appears in the GUI
(graphical user interface) menu, OSD display in the zone monitor and the
messages that appear in the front panel display.
Choices: ENGLISH (English), JAPANESE (Japanese), FRENCH
(French), GERMAN (German), SPANISH (Spanish), RUSSIAN
(Russian)
Note
You can also select the language setting by using GUI menu. See page 95 for details.
LANGUAGE GUI menu
RUSSIAN
JAPANESE
Other languages
··· The selected language is displayed.
— ··· The selected language is not displayed. The menu items and
messages are displayed in English.
MAC FILTER
Descriptions
MONITOR CHECK
Descriptions
Front panel
Zone OSD
display
—
— —