Enjoying Unprocessed Input Sources (Straight Decoding Mode) - Yamaha DSP-AX861SE Owner's Manual

Before performing the following operations, set the operation
mode selector on the remote control to L AMP.
Enjoying unprocessed input
sources (Straight decoding mode)
When this unit is in the "STRAIGHT" mode, 2-channel
stereo sources are output from only the front left and right
speakers. Multi-channel sources are decoded straight into
the appropriate channels without any additional effect
processing.
Press 7 STRAIGHT (or Q STRAIGHT) to select
"STRAIGHT".
STRAIGHT
■ Deactivating the "STRAIGHT" mode
Press 7 STRAIGHT (or Q STRAIGHT) so that
"STRAIGHT" disappears from the front panel
display.
The sound effect is turned back on.
Sound field programs
47
En