Advanced Sound Configurations; Changing Sound Field Parameter Settings - Yamaha DSP-AX861SE Owner's Manual

Changing sound field parameter
settings
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
Note
You cannot change the sound field parameter values when
"MEMORY GUARD" in "OPTION MENU" is set to "ON" (see
page 75). If you want to change the sound field parameter values,
set "MEMORY GUARD" to "OFF".
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector to
DISPLAY on the remote
R
and then press
control.
The following status screen appears in the OSD.
STATUS
MOVIE
Sci-Fi
INPUT:
A.SEL:
NIGHT: OFF
3
Press one of the sound field program
U
selector buttons (
desired sound field program you want to
adjust.

Advanced sound configurations

AMP
L
VOL:-40.0dB
DVD
HDMI
) repeatedly to select the
ADVANCED SOUND CONFIGURATIONS
4
k / n to select the desired sound
D
Press
field parameter and then
the selected sound field parameter value.
PARAMETER
Cursor
.
DSP LEVEL;;;;0dB
P.INIT.DLY;;16ms
P.ROOM.SIZE;;1.0
S.INIT.DLY;;20ms
[RETURN]:STATUS
y
• For details about the function and control range of each
sound field parameter, see page 55.
• When you set a sound field parameter to a value other than
the initial factory settings, an asterisk mark (*) appears by
the sound field parameter name in the OSD.
• The available sound field parameters for some of the
sound field programs may be displayed on more than one
page in the OSD. In this case, press D k / n to scroll
through pages.
• If you press and hold D l / h to change the sound field
parameter value, the initial factory settings are shown
momentarily in the front panel display.
• Use the "PARAM. INI" feature in "OPTION MENU" to
initialize the parameters of each sound field program
within a sound field program group (see page 75).
• You can select the amount of time that the current status is
displayed in the OSD by using the "OSD-AMP" parameter
in "OPTION MENU" (see page 74).
DISPLAY to turn off the sound field
5
R
Press
parameter display.
l / h to change
D
MOVIE
Sci-Fi 1/2
PRO LOGIC
53
En