Yamaha DSP-AX861SE Owner's Manual page 71

Maximum volume MAX VOL.
Use this feature to set the maximum volume level of this
unit. This feature is useful to avoid the unexpected loud
sound by mistake. For example, the original volume range
is 16.5 dB to –80.0 dB. However, when "MAX VOL." is
set to –5.0 dB, the volume range becomes
–5.0 dB to –80.0 dB.
Control range: 16.5 dB, 15.0 dB to –30.0 dB
Control step: 5.0 dB
Notes
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current "MAX
VOL." setting.
• The "MAX VOL." setting takes priority over the "Initial
Volume" setting. For example, if "INI.VOL." is set to –20.0 dB
and "MAX VOL." is set to –30.0 dB, the volume level is
automatically set to –30.0 dB when you turn on the power of
this unit next time.
Initial volume INI.VOL.
Use this feature to set the volume level of this unit when
the power of this unit is turned on.
Choices: Off, –80.0 dB to 16.5 dB
Control step: 0.5 dB
Note
The "MAX VOL." setting takes priority over the "INI.VOL."
setting.
■ HDMI setting
H)HDMI SET
Use this feature to select the component to play back
HDMI audio signals.
SOUND MENU
H)HDMI SET
SUPPORT AUDIO:
p [
[ ]/[ ]:Select
[ENTER]:Return
Support audio SUPPORT AUDIO
Use this feature to select whether to play back HDMI audio
signals on this unit or on another HDMI component connected
to the HDMI OUT jack on the rear panel of this unit.
Choices: DSP-AX861SE, OTHER
• Select "DSP-AX861SE" to play back HDMI audio
signals on this unit. The HDMI audio signals input at
the HDMI IN jacks of this unit are not output to the
HDMI component connected to the HDMI OUT jack
on the rear panel of this unit.
• Select "OTHER" to play back HDMI audio signals on
another HDMI component connected to the HDMI
OUT jack.
Note
The HDMI video signals input at the HDMI IN 1 or HDMI IN 2 jack
of this unit are always output at the HDMI OUT jack of this unit.
DSP-AX861SE
Customizing this unit (MANUAL SETUP)
■ Extended surround decoders
I)EXTD SUR.
Use this feature to enjoy 6.1/7.1-channel playback for
multi-channel sources using the Dolby Pro Logic IIx,
Dolby Digital EX or DTS-ES decoders by using the
connected surround back speakers.
SOUND MENU
I)EXTD SUR.
. MODE;;;;;;;;AUTO
p [
[ ]/[ ]:Select
Mode MODE
Use this feature to select the mode of the decoder driving.
Choices: AUTO, ON, OFF
• Select "AUTO" to activate the optimum decoder to
play back the signal in 6.1/7.1 channels when a signal
flag that can be recognized by this unit is input.
• Select "ON" to play back multi-channel sources using
the selected decoder type in "TYPE".
• Select "OFF" not to use the decoders to create 6.1/7.1
channels.
Decoder type TYPE
SOUND MENU
I)EXTD SUR.
. MODE;;;;;;;;;;ON
TYPE;;;PL xMovie
[ ]/[ ]:Up/Down
p [
[ ]/[ ]:Select
Use this feature to select the decoders used to play back
multi-channel sources when you select "ON" in "MODE".
Choices: PLIIxMovie, PLIIxMusic, EX/ES, EX
• Select "PLIIxMovie" to play back Dolby Digital or
DTS signals in 7.1 channels using the Pro Logic IIx
movie decoder.
• Select "PLIIx Music" to play back Dolby Digital or
DTS signals in 6.1/7.1 channels using the Pro Logic IIx
music decoder.
• Select "EX/ES" to play back Dolby Digital or DTS
signals in 6.1/7.1 channels using the Dolby Digital EX
or DTS-ES decoder.
• Select "EX" to play back Dolby Digital or DTS signals
in 6.1/7.1 channels using the Dolby Digital EX
decoder.
I I
69
En