Connecting Audio Components - Yamaha DSP-AX861SE Owner's Manual

■ Connecting audio components

Notes
• To make a digital connection to a component other than the default component assigned to each the DIGITAL INPUT jack or the
DIGITAL OUTPUT jack, select the corresponding setting for "OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "I/O
ASSIGNMENT" (see page 70).
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal. However, you may hear less noise without the
connection to the GND terminal for some turntables.
• The PHONO jacks are only compatible with a turntable with an MM or a high-output MC cartridge. To connect a turntable with a low-
output MC cartridge to the PHONO jacks, use an in-line boosting transformer or an MC-head amplifier.
• When you connect both the DIGITAL INPUT (OPTICAL) jack and the DIGITAL INPUT (COAXIAL) jack to an audio component,
the priority is given to the DIGITAL INPUT (COAXIAL) jack.
Ground
Coaxial
out
recorder or tape deck
O
Optical out
O
Optical in
Audio
out
Turntable
Audio out
L R
L
GND
R
PHONO CD MD/
IN OUT
(PLAY) (REC)
CD-R
DIGITAL OUTPUT
OPTICAL
1
MD/CD-R
MD/CD-R
2
OPTICAL
COAXIAL
CD
5
DIGITAL INPUT
Audio
C R L
out
CD player
CD recorder, MD
Audio
in
Audio
out
L R L R
AUDIO
TUNER
REMOTE
OUT
indicates recommended connections
indicates alternative connections
Connections
Tuner
L R
21
En