Yamaha DSP-AX861SE Owner's Manual page 12

Quick start guide
■ After using this unit...
Press 1 STANDBY/ON to set this unit to the
standby mode.
This unit is set to the standby mode and consumes a small
amount of power in order to receive infrared signals from
the remote control. To turn on this unit from the standby
mode, press the desired 3 SCENE (or A SCENE)
buttons or 1 STANDBY/ON (or I POWER). See
page 25 for details.
10
En
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
• Creating your original SCENE templates
■ Using various input sources
• Basic controls of this unit
• Using your iPod with this unit
■ Using various sound features
• Using various sound field programs
• Using the pure direct mode for high fidelity
sound
• Customizing the sound field programs
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
• Manually adjusting various parameters of
this unit manually
• Setting the remote control
• Adjusting the advanced parameters
■ Additional feature
Automatically turning off this unit
☞ P. 33
☞ P. 36
☞ P. 37
☞ P. 50
☞ P. 42
☞ P. 48
☞ P. 53
☞ P. 28
☞ P. 63
☞ P. 76
☞ P. 89
☞ P. 41