Setting Advanced Features
You can use the Advanced menu to configure the projector for rear
projection or ceiling mounting, and adjust several other features.
1. Press the
button.
Menu
2. Use the arrow keys (control panel) or the
control) to highlight
settings on the right side:
Video
Language
Audio
Startup Screen
Effect
Color Setting
Setting
Capture
Comp2Sync Termination
Advanced
Rear Proj.
About
Ceiling
Reset All
Reset
:Select
:Enter
3. Press
to select the Advanced menu.
Enter
4. Use the arrow buttons (control panel) or the
(remote control) to set the following options:
I
Language
Select from 9 languages to be used for the projector menus.
I
Startup Screen
Turn on to display the image or logo you have captured
whenever the projector starts. See page 49 for more
information.
I
Color Setting
Adjusts the color temperature of the projected image. Select
Absolute Color Temp.
and 10000 K. Select
blue values, as shown.
Enter
. You see the features and their
Advanced
Select [English]
:
ON
OFF
:
Absolute Color Temp.
RGB
:
:
ON
OFF
:
ON
OFF
Execute
to set a temperature between 5000
to adjust individual red, green, and
RGB
button (remote
Select
ON
OFF
button
Enter
Fine-tuning the Projector
53