Adjusting The Image Shape; Adjusting The Tracking And Synchronization - Epson PowerLite 7700p User Manual

Keystone
note
Images will be projected more
vividly if you adjust the
before adjusting the
Tracking
.
Sync
Using the Projector
26

Adjusting the Image Shape

If the projected image isn't square or has a "keystone" shape, do one or
more of the following:
If your image looks like
I
projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
If your image looks like
I
the button to correct the shape of the image. After
Keystone
correction, your image will be slightly smaller.
You can also perform electronic keystone correction using the
projector's Setting menu. See page 52.

Adjusting the Tracking and Synchronization

If you're projecting from a computer and you notice vertical stripes or
the image is flickering or noisy, you can increase the clarity by pressing
the button on the control panel (or the
control). This resets the projector's tracking, sync, and position
settings. If necessary, you can also correct the image manually using
the and
Tracking Sync
I Press the
Tracking –
stripes.
I Press the and
Sync –
blurring, or vertical noise on the screen image.
or , you've placed the
or , press the
Auto
buttons on the control panel.
and buttons to eliminate vertical
Tracking +
Tracking
Keystone
Sync
Volume
buttons to eliminate flashing,
Sync +
Menu Sync
Tracking
Keystone
Volume Sync
or side of
+ —
button on the remote
Tracking
Esc Help
Tracking