Connecting the Mouse Cable
To use the remote control as a mouse follow the steps below. If the
Macintosh has a USB port, you can use the USB mouse cable
included with the projector. If it has a round mouse port, you'll need a
Macintosh mouse cable; see your projector dealer for help in obtaining
the correct cable.
1. Connect the round end of the USB mouse cable (or a Macintosh
mouse cable) to the projector's
USB mouse cable
2. Disconnect your Macintosh's mouse cable. Connect the other end
of the projector's mouse cable to the mouse or USB port on your
Macintosh.
port.
Mouse 1
Mouse 1 port
Appendix A: Connecting to Additional Equipment
85