Adjusting The Sound - Epson PowerLite 7700p User Manual

note
If you want to overwrite an
existing setting, move to the
setting and press .
Enter
When the confirmation
message appears, choose
Yes
and press .
Enter
Fine-tuning the Projector
46
4. Press to assign it to the next available number.
Enter
5. Press again. When you see the "Overwrite?" prompt, select
Enter
or and press
Yes No
6. Press to return to the Video menu.
Esc
When you want to use a saved setting, press the
remote control. You see the setting for session number 1 displayed in
yellow at the top right of the screen.
To select another number, press the
setting number you want is displayed. The projector resets according
to the selected setting.

Adjusting the Sound

You can use the Audio menu to adjust the sound volume or
treble/bass balance.
1. Press the button. You see the main menu.
Menu
2. Press the down arrow (control panel) or press down on the
button (remote control) to highlight
following:
Video Volume
Audio Treble
Effect Bass
Setting Reset
Capture
Advanced
About
Reset All
:Select :Enter
3. Press to select the Audio menu.
Enter
.
Enter
Preset
button again until the
Preset
. You see the
Audio
: 0
: 0
: 0
Execute
button on the
Enter