Select
computer 2
or
component
video
E@sy-MP
Select video
source
Adjust
volume
Select
computer 1
Using the Remote Control
32
Controlling the Picture and Sound
You can use the remote control to select your source, adjust the
volume, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, or display a picture-in-picture video image.
Make sure you have set up your projector and connected your audio
or video source as described in Chapter 1 or Appendix A.
Switching Between Picture Sources
If you've connected your projector to more than one computer and/or
video source, you can use the buttons on the remote control (or the
control panel) to switch between the different sources.
Press the
button to switch between a standard composite
I
Video
video source and an S-Video source.
Press the
button to select your first computer.
I
Comp1
I
Press the
Comp2/YCbCr
or a component video source.
After you select a source, the screen goes dark for a moment before the
image appears.
Adjusting the Volume
If you've connected an audio source to the projector, you can adjust
the sound that's output through the projector's speakers.
I
To increase the volume, press on the right (
button.
To reduce the volume, press on the left (
I
button.
button to select your second computer
) side of the
+
) side of the
–
Volume
Volume