Additional Components - Epson PowerLite 7700p User Manual

Additional Components

Depending on how you plan to use the projector, you may need
additional components:
To receive an S-Video signal, you need an S-Video cable. (One is
I
usually provided with your video device.)
I To receive a component video signal from a VCR or other video
device, you need a BNC cable (usually provided with the device).
I To connect two computers to the projector at the same time, you
need a VGA to BNC cable. To amplify the second computer's
audio through the projector's sound system, you need an
RCA-to-3.5 mm stereo cable. See your computer or electronics
dealer to obtain these cables.
I Some older PowerBooks and Macintosh desktop models may
need the Macintosh adapter set shown on page 83 (available from
EPSON; see page 8). Older iMac systems may need a special
adapter to provide a VGA output port; see your computer dealer.
Some systems may need an additional cable to use the remote
I
control as a wireless mouse. If your Macintosh doesn't have a USB
port, you'll need a Macintosh mouse cable. If your PC doesn't
have a USB or PS/2 port, you'll need a PC serial cable. See your
projector dealer to obtain the correct cable.
I If you plan to use the EMP Link V software to control the
projector, you'll need a standard serial cable, which you may
purchase from your computer dealer.
I To take advantage of the projector's Digital Visual Interface, you
need a DVI cable, and your computer must be capable of
producing video signals in DVI format (for details, see page 89).
You can purchase this cable from EPSON; see page 8.
Welcome
7