Epson PowerLite 7700p User Manual page 58

Fine-tuning the Projector
52
4. Use the arrow buttons (control panel) or the
(remote control) to set the following options:
I Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular.
I
P in P
Changes from a composite (standard) video source to an
S-Video source for the picture-in-picture display.
I
No-Signal Msg
Selects the screen color and message to display when the
projector is not receiving a signal. The logo setting displays an
image that you have transferred to the projector. See page 49
for instructions on transferring an image to use as the
no-signal message.
I
Prompt
Turns off the identifying text that appears briefly when you
switch from computer input to a video source.
I
A/V Mute
Selects the screen color or image to display when you press
the
A/V Mute
you have transferred to the projector. See page 49 for
instructions on transferring an image to use for the A/V Mute
display.
I
BNC
Specifies the format for input to the BNC connectors. If the
source is a computer, select
device, select
YCrCb.
I
Sleep mode
Disables the power management system. Normally, the lamp
turns off when the projector has not received any input
signals for 30 minutes.
5. When you're finished, press
button. The logo setting displays an image that
the source is a video
RGB. If
.
Esc
button
Enter