Table of Contents
Advertisement
Installing the software
16
1 • Installation
The modem port is identified by the following icon:
3. Connect the other end of the RS-232C cable to the PC's RS-232C serial
connector or to the RS-232C adapter on your Macintosh. The serial
connector on your PC is a nine-pin male connector. It may be labeled Serial,
RS-232C, COM1, or something similar. If you have a 25-pin serial connector,
you need to obtain a 25-pin to 9-pin converter.
Two diskettes are provided with the kit: one for the Macintosh and one for the PC.
Use only the diskette appropriate for your platform. Each contains ELP Link and
the ELP Remote Programmer.
Before installing the software, exit any open programs. Insert the appropriate
diskette in a diskette drive. Then do the following:
• Windows.
®
For version 3.1, in the Program Manager, choose Run from the
File menu; for Windows 95, choose Start and then Run. In the Command Line
text box, type A:SETUP or B:SETUP as appropriate. Choose OK. Then
follow the onscreen instructions.
• Macintosh. Double-click on the ELP Installer icon and follow the onscreen
instructions.
Advertisement
Table of Contents
