Installing The Software - Epson EMP-8300 Setup Manual

EasyMP.net Software

Installing the Software

The following section explains how to install the software from the "EasyMP.net
Software CD-ROM".
PROCEDURE
1
Start up Windows by switching on the computer, and insert the
"EasyMP.net Software CD-ROM" in the CD-ROM driver.
The setup program will start up automatically.
If the Setup program does not start automatically, select "Start" and
"Run...". Specify "E (CD-ROM drive name):\SETUP.EXE" in the
"Run..."dialog box, and click on "OK".
2
Make sure that "Installing EasyMP.net Software" has been selected,
and click on
28
.