SUPPORT
LONG WORKPIECES
See Figure 38.
Longworkpieces need extra supports. Supportsshould
be placed along the workpiece so it does not sag. The
support should let the workplece lay f/at on the baee
of the saw and work table dudng the cutting operation.
Use the optional work clamp or a C-clamp to secure the
workpiece.
_,
WARNING: To avoid serious personalinjury,always
keep hands outside the no hands zone; at least3
in, from blade. Never perform any cutting operation
fraehand (without holding workplece againstthe
fence), "Theblade coutd grab the wor_piece _fit stips
or twists.
4,5" X 48"COMPOUND MITERCUT
Fig. 37
LONG WORKPIECE
27
ROLLER
SUPPORT
Fig. 38