HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 73

Status Code Value
34
Volume is Missing
35
Invalid Cursor
36
Invalid Target for the
Operation
37
No More Events
38
Lock Busy
39
Time Not Set
40
Not a Supported Version
41
No Logical Disk for Vdisk
42
Logical disk Presented
43
Operation Denied On Slave
44
Not licensed for data
replication
45
Not DR group member
46
Invalid DR mode
47
The target DR member is in full
copy, operation rejected
Meaning
The operation could not be completed
because the drive volume is in a missing
state.
The supplied cursor or sequence number
is invalid. This may indicate a user or
program error.
The specified target logical disk already
has an existing data sharing relationship.
This can indicate a user or program er-
ror.
There are no more events to retrieve.
(This message is informational only.)
The command lock is busy and being
held by another process.
The storage system time is not set. The
storage system time is set automatically
by the management software.
The requested operation is not supported
by this firmware version. This can indic-
ate a user or program error.
The specified SCVD does not have a lo-
gical disk associated with it. This can
indicate a user or program error.
The virtual disk specified is already
presented to the client and the requested
operation is not allowed.
The request is not allowed on the slave
controller. This can indicate a user or
program error.
This error is no longer supported.
The operation cannot be performed be-
cause the virtual disk is not a member of
a Continuous Access group.
The operation cannot be performed be-
cause the Continuous Access group is
not in the required mode.
The operation cannot be performed be-
cause at least one of the virtual disk
members is in a copying state.
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
How to Correct
Resolve the condition and retry the
request. Report the error to product
support.
Report the error to product support.
Report the error to product support.
No action required.
Retry the request at a later time.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Delete the associated presenta-
tion(s) and retry the request.
Report the error to product support.
Report the error to product support.
Configure the virtual disk to be a
member of a Continuous Access
group and retry the request.
Configure the Continuous Access
group correctly and retry the re-
quest.
Wait for the copying state to com-
plete and retry the request.
73