HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 76

Status Code Value
65
Bad image header
66
Bad image
67 The firmware image file is
too large.
Image too large
70
Image incompatible with
system configuration. Version
conflict in upgrade or
downgrade not allowed.
71
Bad image segment
72
Image already loaded
73
Image Write Error
74
Logical Disk Sharing
75
Bad Image Size
76 Error messages
Meaning
The firmware image file has a header
checksum error.
The firmware image file has a checksum
error.
Invalid status for logical disk. This error
is no longer supported.
The firmware image file is incompatible
with the current firmware.
The firmware image download process
has failed because of a corrupted image
segment.
The firmware version already exists on
the device.
The firmware image download process
has failed because of a failed write op-
eration.
Case 1: The operation cannot be per-
formed because the virtual disk or snap-
shot is part of a snapshot group.
Case 2: The operation may be prevented
because a snapclone or snapshot
operation is in progress. If a snapclone
operation is in progress, the parent
virtual disk should be discarded
automatically after the operation
completes. If the parent virtual disk has
snapshots, then you must delete the
snapshots before the parent virtual disk
can be deleted.
Case 3: The operation cannot be
performed because either the previous
snapclone operation is still in progress,
or the virtual disk is already part of a
snapshot group.
Case 4: A capacity change is not
allowed on a virtual disk or snapshot that
is a part of a snapshot group.
Case 5: The operation cannot be
performed because the virtual disk or
snapshot is a part of a snapshot group.
The firmware image file is not the correct
size.
How to Correct
Retrieve a valid firmware image
file and retry the request.
Retrieve a valid firmware image
file and retry the request.
Retrieve a valid firmware image
file and retry the request.
Retrieve a valid firmware image
file and retry the request
Verify that the firmware image is
not corrupted and retry the firm-
ware download process.
No action required.
Verify that the firmware image is
not corrupted and retry the firm-
ware download process.
Case 1: No action required.
Case 2: No action required.
Case 3: If a snapclone operation
is in progress, wait until the
snapclone operation has
completed and retry the operation.
Otherwise, the operation cannot
be performed on this virtual disk.
Case 4: No action required.
Case 5: No action required.
Retrieve a valid firmware image
file and retry the request.