Hp-Ux Configuration; Requirements; Hba Configuration; Single Path Hba Server With Openvms Or Tru64 Unix - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

Figure 31 Single path HBA server with OpenVMS or Tru64 UNIX
.
1 Network interconnection
2 Single HBA server
3 Dual HBA server
4 Management server
5 SAN switch 1

HP-UX configuration

Requirements

• Proper switch zoning must be used to ensure each single path HBA has an exclusive path to its
LUNs.
• Single path HBA server can be in the same fabric as servers with multiple HBAs.
• Single path HBA server cannot share LUNs with any other HBAs.
• In the use of snapshots and snapclones, the source virtual disk and all associated snapshots and
snapclones must be presented to the single path hosts that are zoned with the same controller. In
the case of snapclones, after the cloning process has completed and the clone becomes an ordinary
virtual disk, you may present that virtual disk as you would any other ordinary virtual disk.

HBA configuration

• Host 1 is a single path HBA host.
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
6 SAN switch 2
7 Fabric zone
8 Controller A
9 Controller B
107