HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 74

Status Code Value
48
Security credentials needed.
Please update your system's
ID and password in the
Storage System Access menu.
49
Security credentials supplied
were invalid. Please update
your system's ID and password
in the Storage System Access
menu.
50
Security credentials supplied
were invalid. Please update
your system's ID and password
in the Storage System Access
menu.
51
Storage system connection
down
52
DR group empty
53
Incompatible attribute
54
Vdisk is a DR group member
55
Vdisk is a DR log unit
56
Cache batteries failed or
missing.
57
Vdisk is not presented
58
Other controller failed
74 Error messages
Meaning
The management software is unable to
log in to the storage system. The storage
system password has been configured.
The management software is unable to
login to the device. The storage system
password may have been re-configured
or removed.
The management software is already
logged in to the device. (This message
is informational only.)
The Continuous Access group is not
functioning.
.
No virtual disks are members of the
Continuous Access group.
The request cannot be performed be-
cause one or more of the attributes spe-
cified is incompatible.
The requested operation cannot be per-
formed on a virtual disk that is already
a member of a data replication group.
The requested operation cannot be per-
formed on a virtual disk that is a log unit.
The battery system is missing or dis-
charged.
The virtual disk member is not presented
to a client.
Invalid status for logical disk. This error
is no longer supported.
How to Correct
Use the management software to
save the password specified so
communication can proceed.
Use the management software to
set the password to match the
device so communication can pro-
ceed.
No action required.
Verify that devices are powered
on and that device hardware con-
nections are functioning correctly.
Add one or more virtual disks as
members and retry the request.
Retry the request with valid attrib-
utes for the operation.
Remove the virtual disk as a mem-
ber of a data replication group
and retry the request.
No action required.
Report the error to product support.
The virtual disk member must be
presented to a client before this
operation can be performed.
Report the error to product support.