Assembly; Locate Model Label Of Tractor; Locate Mower Suspension Brackets; Instructions For Tractors With Single Front Deck Suspension Deck - Craftsman 486.244412 Operator's Manual

42" snow blade
Hide thumbs Also See for 486.244412:
Table of Contents

Advertisement

TOOLS
REQUIRED
FOR ASSEMBLY
(1)
(1)
(1)
(1)
(1)
(1)
Pliers
Hammer
Adjustable Wrench (or socket set)
9/16" Open End or Box End Wrench
7/16" Open End or Box End Wrench
1/2" Open End or Box End Wrench
NOTE:
Not all of the supplied parts and hardware will
be needed for any one particular tractor. Unneeded items
may be discarded after assembly has been completed.
NOTE:
Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
CAUTION:
Do not begin assembling until
the tractor engine, muffler and exhaust
deflector have been allowed to cool off.
LOCATE
MODEL
LABEL OF TRACTOR
Look under your tractor seat, locate the serial
number, and proceed to the step as shown.
£RgFT MgH
CONFORMS
TO
ANSi
B71.1-2003
SAFETY
STANDARDS
IIIil_llllllill
IIIIIIlllln,,,........,,,_llllllllllll
SERIAL O00000AO00000
FOR P AR1S
AND S ERVICE
CALL 1-800-4MY-HOME
SEARS,
ROEBUCK
AND
CO,
Hoffm_ln
Est_}_es, IL 60179
193653
,j
917 MODEL TRACTORS
GO TO PAGE 5
INSTRUCTIONS
FOR 917 MODEL TRACTORS
LOCATE MOWER SUSPENSION
BRACKETS
Look under the front of your tractor.
If there is a single mower deck suspension
bracket located underneath the middle of the front
axle as shown in the image below, proceed to
INSTRUCTIONS
FOR TRACTORS WITH SINGLE
FRONT DECK SUSPENSION BRACKET below.
If your tractor does not have a mower deck
suspension bracket underneath the middle of
the front axle, proceed to INSTRUCTIONS
FOR
TRACTORS WITH DUAL FRONT SUSPENSION
BRACKETS on page 6.
MOWER DECK
SUSPENSION
BRACKET
FIGURE 1
INSTRUCTIONS
FOR TRACTORS WITH SINGLE
FRONT DECK SUSPENSION
BRACKET
STEP 1: (SEE FIGURE 2)
Remove the tractor hood. Refer to your tractor owners
manual for instructions on how to properly remove
the hood.
Remove the browning shield from the front of the
tractor as shown. Hold onto the shield as you remove
the second bolt to prevent it from falling.
£RnFT MRH
CONFORMS
TO
ANSi
B71.1=2003
SAFETY
STANDARDS
|pl==l .....
'="=l|l I
III|l_lllllllll
IIIIIIllll,,,.,...... ,=,,,_|l|llllllll
SERIAL
000000A000000
FOR
P/\RTS
AND SERVICE
CALL 1-800-4MY-HOME
SEARS,
ROEBUCK
AND
CO,
Hoffman
Estates,
IL 60179
193653
247 MODEL TRACTORS
GO TO PAGE 8
NOTE: Reinstall the browning shield before using your
tractor.
FIGURE 2
BROWNING
SHIELD

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents