Craftsman 486.244412 Operator's Manual page 9

STEP3:
(SEE FIGURE 13)
* Assemble a shoulder bolt (V) and a 3/8" nylock nut
(L) to the front bracket on each side of the tractor,
unless a shoulder bolt is already present.
3/8" NYLOCK NUT (L)
SHOULDER BOLT (V)
/
FIGURE 13
STEP 4: (SEE FIGURE 14)
• Pull out on the attachment pins on the hitch assembly
and swing the top of the pins down away from the
holes they were in.
Hook the hitch assembly onto the shoulder bolts in
the sides of the tractor frame.
Align the holes in the hitch assembly with the holes
in the tractor frame. Insert the attachment pins to lock
the hitch assembly in place.
Proceed to BLADE ASSEMBLY ALL TRACTORS on
page 10.
ATTACHMENT PiN
SHOULDER BOLT
FIGURE 14