Using Smm Agent - Intergraph InterSite Server Monitor Setup Manual

35
Four items display beneath the server icon: Historian, DMI, SMM Agent, and NT
Performance Monitor, as shown in the following figure. (The server name in this example is
applepie.)
Following sections briefly describe each item and its uses. The SMM Agent is discussed first,
since it contains the configuration utilities you need to make the ISM software run efficiently
on your server. For detailed information about Historian and DMI, see LANDesk Server
Manager Help and the LANDesk Server Manager User's Guide. For detailed information
about SMM Agent, see LANDesk Server Manager Help and the LANDesk Server Monitor
Module User's Guide. For detailed information about NT Performance Monitor, see
Windows NT Performance Monitor Help and Windows NT documentation and Help.

Using SMM Agent

The SMM Agent contains many utilities you can use to monitor servers running the Windows
NT operating system. These utilities allow you to log into your server user account, list
hardware and software configurations, graph data such as server temperatures, configure the
PC Card modem in the ISM board, and configure services such as a pager service.
When you double-click SMM Agent, you will see the items shown in the following figure.
Following subsections briefly describe each item; for detailed information, see LANDesk
Server Manager Help and the LANDesk Server Monitor Module User's Guide.