Configuring A Paging Service - Intergraph InterSite Server Monitor Setup Manual

26
16. Select the appropriate baud rate in the Baud box. The baud rate is the rate of
communication between the ISM board and the modem. A higher baud rate is necessary
to account for overhead; for example, choose 19200 for a 14.4 KB per second modem.
17. Select the correct method of parity checking in the Parity box. The possible values are
None, Odd, or Even.
18. Select the method to use for dialing in the Dialing box. The possible values are Tone or
Pulse. If you have touch-tone phone service, select Tone; otherwise, select Pulse.
19. Select the number of stop bits in the Stop Bits box. The possible values are 1, 1.5, or 2.
20. Select the number of data bits in the Data Bits box. The possible values are 7 or 8.
21. Select the data flow control setting in the Flow Control box. The possible values are
None (software) or RTS/CTS (hardware).
See LANDesk Server Manager Help or the LANDesk Server Monitor Module User's Guide
for more information about configuring and using the modem.

Configuring a Paging Service

If you want to configure Server Monitor to page you when it detects a specific alert (such as a
power failure), you must first configure a paging service.
To configure a paging service:
1. Start an SMM session and log into the root user account, if you are not already in an
SMM session.
2. On the Configure menu, select Pager Settings. (You may also double-click Pager Settings
in the Display pane of the LANDesk Manager window.) The Configure Pager Settings
dialog displays.