Configuring Modems And Monitoring Console Alert Destinations - Intergraph InterSite Server Monitor Setup Manual

2. Double-click the domain where your server is located. A server icon displays under the
domain name.
3. Double-click the server icon. When prompted for user ID and password, key in root for
the user ID and calvin for the password. Once you are logged in to the SMM session,
you may configure other accounts.
4. Double-click SMM Agent. A list of SMM utilities displays.
5. Double-click SMM Session. A window displays in the Window pane of the LANDesk
Server Manager Console window, titled nodename:: SMM Session. It will contain the
messages Trying to reach Server Manager Module and Ready to login .
6. In the login dialog, type root for the user name and calvin for the password. You are
now logged in to the SMM account.

Configuring Modems and Monitoring Console Alert Destinations

The PC Card modem in the ISM board installed in the server must be properly configured
before it can send or receive phone calls.
You must first configure the modem in an in-band or local session. You can then reconfigure
the modem in an in-band or an out-band session using the Configure Modem dialog. This
dialog contains configurations for all out-band connections.
Out-band alerts can be configured to be delivered to the monitoring console using the
LANDesk Server Manager Console. The Configure Modem dialog use described in this
section is for configuring the destinations for out-band alerts to one or more monitoring
consoles.
NOTE If the current modem configuration does not work, you can change the configuration only in an
in-band session.
To configure an ISM board PC Card modem:
1. Start an SMM session and log in to the root user account, if you are not already in an
SMM session.
2. On the Configure menu, select Modem Settings. (You may also double-click Modem
Settings in the Display pane of the LANDesk Server Manager window.) The Configure
Modem Settings dialog displays.
23