Mounting Range Hood To Cabinet; Replace The Led Light - Windster WS-58 series Operation Manual

H. MOUNTING RANGE HOOD TO CABINET
1. Position the hood in place so that :
a. The electrical line is routed through the appropriate Knockout opening.
This step will have to be accomplished while positioning the hood (Fig.10)
b. The large part of the keyhole mounting slots on the hood fit onto the hood
mounting screws projecting from the bottom of the cabinet. (Fig.11)
2. Adjust the hood so the front is flush with the cabinet front.
3. Tighten the hood mounting screws all the way into the cabinet or into
the 1" x 2" wood strips so the hood is secure.
Knockout opening
I. REPLACE THE LED LIGHT
Before changing LED light ensure the unit is pressed the
when you want to change the LED light please always wear working gloves.
1. Using suitable tool (small slotted screw driver) gently pry off the LED light set.
2. Taking off the wire connecter with LED light set.
3. Replace a new LED light set and reconnect the wire to the connector.
4. Before push back the original LED light position, test the LED light.
LED driver:
Model: HP1500-36
input: 100-240vdc
output: 3.6vdc=1500maH
NOTE: For LED light replacement, you may not find the appropriate LED lights
from market, please contact with distributor(s)/dealer(s).
Color:
green/white/black
Fig.10 Fig.10
8
Fig.11
Fig.11
main power button off,
LED light: 1W
Model: HP-15A