Chain Dial Communication - Kyocera TASKalfa 650c Operator's Manual

Chain Dial Communication

You can chain pre-registered sets of numbers to form a dialing string. For example, you can form the desired number by
specifying sets of numbers registered in the address book sequentially such as region code, area code and fax numbers.
1
Place the original(s).
 P.19 "Handling an original"
2
Press the [FAX] button on the control panel.
 P.16 "Basic procedures"
3
Press [OPTION] and set the transmission conditions.
 P.23 "Setting the transmission conditions"
4
Press the [ADVANCED] tab, and then press [CHAIN DIAL COMM.].
5
Repeat this operation until the desired number is formed.
 P.27 "Specifying the recipient"
You can form the dialing number which is up to 128 digits in length. The numbers are chained in the order you
specify them.
6
Press [SEND].
 P.16 "Basic procedures"
4 ADVANCED FUNCTIONS

Chain Dial Communication

71