Kyocera TASKalfa 650c Operator's Manual page 103

6.SETTING ITEMS
2
Set each option, and then press [OK].
Press or
RX MODE
Set the fax reception mode.
AUTO:
MANUAL:
 To receive a fax in the manual mode, an external telephone is required.
 When the 2nd Line for FAX Unit (option) is installed, the reception mode of the 2nd lines limited to "AUTO
reception".
MONITOR VOLUME / COMPLETION TONE VOLUME
Monitor tone volume (line tone when on-hook) and Reception completion tone volume (You hear this tone when
reception is completed). Each volume can be set in 8 levels (0: tone Off).
DIAL TYPE / DIAL TYPE (LINE2)
There are 2 types of telephone lines. When you first install this equipment or you change the connected telephone
line, set this according to the telephone line type.
DP: Dial pulse lines.
MF: Multi frequency lines.
 Setting these items may not be required since they may not be displayed on the screen (it depends on your
country or region).
 "DIAL TYPE (LINE2)" can be set when the 2nd Line for FAX Unit (optional) is installed.
to switch the pages.
This equipment receives an incoming fax automatically.
This equipment receives an incoming fax manually.
6 SETTING ITEMS
Administrator Settings 101