Kyocera TASKalfa 650c Software Installation Manual page 68

3 INSTALLING PRINTER DRIVERS FOR WINDOWS
Select [Connect to a printer on the Internet or on a home or office network], and enter
5
"http://[IP address]:631/Print" in the [URL] field.
Enter the IP address of this equipment instead of [IP address].
Example: IP address = 192.168.1.2
http://192.168.1.2:631/Print
Enter the IPv6 address in the [Printer Name or IP Address] box when the MFP is connected in an IPv6 network.
If your network uses a DNS or WINS server, enter the printer name of this equipment provided from DNS or
WINS instead of [IP address].
Example: Print Server Name = Mfp-05212774
http://Mfp-05212774:631/Print
When you connect from the Internet, enter the FQDN of this equipment provided from DNS instead of [IP
address].
Example: URL = mfp_05212774.km.com
http://mfp_05212774.km.com:631/Print
"P" for "Print" in the IPP URL must be capitalized. When you are using on Windows 2000/XP/Server 2003, the
IPP port can be created by entering "print" (non-capitalized) in the IPP URL, but the print job cannot be sent to
the equipment. In that case, delete the IPP port and then create the IPP port correctly again.
If the IPP Port80 Enabled option is enabled on this equipment, you can exclude the port number from the
URL. (i.e. "http://192.168.1.2/Print")
If the Enable SSL option for IPP Print is enabled, you must enter "https://[IP address]:[SSL port number]/
Print" in the "URL" field.
(i.e. "https://192.168.1.2:443/Print")
Click [Next].
6
The [Add Printer Wizard] dialog box appears.
When the Authentication setting for IPP Print is enabled, the dialog box to enter a user name and password
appears. If this dialog box appears, enter the user name and password and click [OK]. For user name and
password, please ask your administrator.
66 Other Installations