Configuring Unix/Linux Printing Using Unix/Linux Filters - Kyocera TASKalfa 650c Software Installation Manual

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux

Configuring UNIX/Linux printing using UNIX/Linux filters

When you want to configure the UNIX/Linux printing using the UNIX/Linux filters, install the UNIX/Linux filters and
configure the LPR queue.
Installing the UNIX/Linux filters
UNIX/Linux Filters are provided as TAR files for each Operating System. You can install them by copying the TAR file into
the root directory and extract the file.
Copying the UNIX/Linux filters
Insert the Client Utilities CD-ROM into the CD-ROM drive.
1
2 Log on to the root account.
Enter the following command and check the output:
3
For Solaris:
uname
Output on screen should be:
SunOS
For HP-UX:
uname
Output on screen should be:
HP-UX
For IBM AIX:
uname
Output on screen should be:
AIX
For Linux:
uname
Output on screen should be:
Linux
For OpenUNIX:
uname
Output on screen should be:
OpenUNIX
If the output is not as above, ask your administrator.
4 Copy the TAR file onto the root.
A TAR file for each operating system is included in following folders:
For Solaris: [CD-ROM]/Admin/SolarisFilter/Usa/
For HP-UX:[CD-ROM]/Admin/HP-UXFilter/Usa/
For AIX:[CD-ROM]/Admin/AIXFilter/Usa/
For Linux: [CD-ROM]/Admin/LinuxFilter/Usa/
For OpenUNIX: [CD-ROM]/Admin/OpenUnixFilter/Usa/
5 Change to the root (/) directory.
5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Setting Up the UNIX/Linux Filters 117