Configuring The Printer On Mac Os X 10.2.4 To Mac Os X 10.3.X; Configuring The Printer On Mac Os X 10.4.X - Kyocera TASKalfa 650c Software Installation Manual

4 INSTALLING PRINTER DRIVERS FOR MACINTOSH

Configuring the printer on Mac OS X 10.2.4 to Mac OS X 10.3.x

After you copy the PPD file to the library folder in the System Folder, you can configure the printer.
This equipment supports the following Macintosh Printing Services: LPR Printing, AppleTalk Printing, IPP Printing, and
Bonjour Printing.
LPR printing
When this equipment and your computer are connected over TCP/IP network, you can perform LPR printing from
Macintosh computer.
AppleTalk printing
When this equipment and your computer are connected over AppleTalk network, you can perform AppleTalk printing
from Macintosh computer.
IPP printing
When this equipment and your computer are connected over TCP/IP network, you can perform IPP printing from
Macintosh computer.
Bonjour printing
When this equipment and your computer are connected over TCP/IP network, you can perform Bonjour printing from
Macintosh computer.
Configuring Macintosh LPR printing
The following describes an operation on Mac OS X 10.3.x. The procedure is the same when Mac OS X 10.2.4 to 10.2.8 is
used.
1 Start the Print Center (for Mac OS X 10.2.4 to 10.2.8) or Printer Setup Utility (for Mac OS
X 10.3.x) located in the "Applications:Utilities" folder in the Boot Disk.
Mac OS X 10.2.4 to 10.2.8
Mac OS X 10.3.x
The [Printer List] dialog box appears.
102 Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.5.x