Setting Wia Driver - Kyocera TASKalfa 205c Operation Manual
205c/255c operation guide
Hide thumbs
Also See for TASKalfa 205c:
- Operation manual (215 pages) ,
- User manual (99 pages) ,
- Safety manual (2 pages)
Table of Contents
Advertisement
Preparation before Use > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
NOTE
The following is not necessary to register when using the machine possesses an IP address or host name that you
have specified during installation of WIA Driver.
1
2
Display the screen.
1
Click the Windows Start button and enter Scanner in Program and File Search. Click
View scanners and cameras in the search list.
2
Select the same name as this machine from WIA Drivers, and press the Properties.
1
2
Configure WIA Driver.
Enter the machine name.
When using SSL, select the
checkbox beside SSL.
1
2
4
3
When user login administration is enabled, select the checkbox beside
Authentication, and enter Login User Name (up to 64 characters) and
Password (up to 64 characters).
When job accounting is enabled, select the checkbox beside Account
ID, and enter the account ID as many as eight digits.
2-19
5
Advertisement
Table of Contents
