Gigabit Ethernet Board; Optional Function - Kyocera TASKalfa 205c Operation Manual

Appendix > Optional Equipment

Gigabit Ethernet Board

The Gigabit Ethernet Board provides a high-speed connection for the Gigabit-per-second interface. Since the kit was
designed to work with TCP/IP, NetWare, NetBEUI, and AppleTalk protocols, in the same way as the main unit, it fulfills
the network printing demands on Windows, Macintosh, and UNIX environments. This expansion kit is also compatible
with ThinPrint.

Optional Function

You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine. You can use these applications for a limited period on a trial
basis.
UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
NOTE
Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
Starting Application Use
Use the procedure below to start using an application.
NOTE
If user login administration is disabled, the user authentication screen appears. Enter your login user name and
password and then press [Login]. For this, you need to login with administrator privileges. Refer to Adding a User on
page 9-37 for the default login user name and password.
1
Display the screen.
1
Use [
System Menu/Counter.
System Menu
User Login/Job Accounting
Printer
System
Date/Timer
System Menu/Counter.
System

Optional Function

11-5
] or [ ] to scroll up and down.
10:10
2
3
< Back
4/5
10:10
2/2