Printing On Posterboard - Epson Stylus Pro 10000 Quick Reference Manual

Loading and Using Cut Sheet Paper
Loading and Using Cut Sheet Paper
1
Make sure roll paper is not loaded for printing, and
the roll paper cover is closed.
2
Press the
Paper Source
light comes on.
Sheet
3
Make sure the paper set lever is all the way in, in the
secured position.
To avoid damaging the printer, never move
the paper set lever while the Operate or Pause
light is flashing.
4
Feed the sheet into the paper slot until it extends
through the slot. Align the paper with the scale on
the roll paper cover.
5
Press the button. The print head moves and
Pause
the paper feeds into printing position automatically.
appears on the control panel display.
READY
6
Print your page. After printing, the sheet stays in the
printer.
7
To remove the print, hold it while pressing the lower
button.
Paper Feed
button repeatedly until the

Printing on Posterboard

When you print on posterboard (more than 19 mil thick),
you need to open the lower cover before you feed the
board for printing. Follow steps 1 and 2 to the left, then
open the lower cover.
1
Pull the paper set lever out.
2
Feed the board into the paper slot until the bottom
edge rests behind the open lower cover.
3
Align the board with the scale on the roll paper cover.
4
Align the board with the vertical row of holes at the
paper exit.
5
While holding the board in position, push the paper
set lever all the way in. Close the lower cover.
6
Press the
Pause
the posterboard feeds into printing position.
appears on the control panel display.
7
Run your print job. After printing, the posterboard
stays in the printer.
8
Hold the posterboard as you pull the paper set lever
out. Then gently remove the print at the paper exit.
3
button. The print head moves and
READY