2.
Click Yes to start the general configuration wizard (see
to:
Choose iSCSI HBA port to configure the QLogic iSCSI HBA.
Configure HBA Port network settings.
Configure HBA Port DNS settings (optional).
Configure SLP Target Discovery settings (optional).
Configure iSNS Target Discovery settings (optional).
Figure 53 Connect to host screen
Figure 54 Start general configuration wizard
Adding targets to QLogic iSCSI Initiator
To add the HBA Port iSCSI targets:
1.
Click the green plus sign (see
2.
Enter the first iSCSI or iSCSI/FCoE module's target port IP address.
1 14
iSCSI or iSCSI/FCoE configuration rules and guidelines
Figure 55 (page
115)).
Figure 54 (page
114)). Use the Wizard