F iSCSI and iSCSI/FCoE module log messages
This appendix provides details about messages logged to a file. The message log is persistent
because it is maintained across module power cycles and reboots. Information in
266)
is organized as follows:
The ID column specifies the message identification numbers in ascending order.
The Log Message column indicates the message text displayed in the iSCSI or iSCSI/FCoE
module's CLI. Note that:
Log messages for the iSCSI driver module are common to both iSCSI ports. Log messages
◦
beginning with #0 denote iSCSI port 1 (GE1) and log messages beginning with #1 denote
iSCSI port 2 (GE2).
Log messages for the FC driver module are common to both FC ports. Log messages
◦
beginning with #0 denote FC port 1 (FC1) and log messages beginning with #1 denote
FC port 2 (FC2).
The Module Type column specifies the message reporting module, where:
◦
App = Application module
FC = FC driver
◦
◦
iSCSI = iSCSI driver
◦
System = System module
TOE = TCP/IP offload engine module
◦
◦
User = User module
The Msg. Type column specifies the log message type, where:
◦
Error = Error log message
Fatal = Fatal log message
◦
◦
Info = Informational log message
The Description column provides additional information about the log message.
Table 31 iSCSI or iSCSI/FCoE module log messages
ID
Log message
40967
QLBA_NullDoorbell: driver
unloaded, port disabled
40996
QLBA_ProcessTrb: Processing
unsupported ordered tag
command
41004
QLBA_ProcessTrb: Processing
unsupported head of queue
tag command
41058
QLBA_CreateTargetDeviceObject:
Too many devices
41060
QLBA_CreateTargetNodeObject:
Too many devices
41067
QLBA_CreateLunObject:
LunObject memory unavailable
41077
QLBA_CreateInitiatorObject:
Too many initiators
266 iSCSI and iSCSI/FCoE module log messages
Module
Msg
Description
Type
Type
App
Error
NULL doorbell routine for unloaded drivers. When
a driver is unloaded, the doorbell routine is
redirected to this NULL routine.
App
Error
Processing unsupported ordered tag task
management command.
App
Error
Processing unsupported head-of-queue task
management command.
App
Error
Unable to create an object for the target device;
exceeded the maximum number of target devices.
App
Error
Unable to create an object for the target node;
exceeded the maximum number of target devices.
App
Error
Memory unavailable for LUN object.
App
Error
Unable to create an object for initiator object;
exceeded the maximum number of initiators.
Table 31 (page