HP EVA P6000 User Manual page 268

Table 31 iSCSI or iSCSI/FCoE module log messages (continued)
41508
QLBI_SetPortInfo:
QLUT_AllocatePortalObject
failed (PortType 0x%x,
PortId 0x%x)
41626
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41629
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41635
QLBI_Passthru: Invalid data
length %d bytes
41636
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41696
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41700
QLBI_Passthru: Invalid CDB
length %d bytes
41701
QLBI_Passthru: Invalid data
length %d bytes
41717
QLBI_Passthru: Invalid data
length %d bytes
41750
QLBI_Ioctl: ERROR: Operation
(0x%x) not supported in this
mode
41768
QLBI_GetLunList: REPORT LUNS
command failed
41769
QLBI_GetLunList: REPORT LUNS
command failed with CHECK
CONDITION, SCSI STATUS
0x%02X
41771
QLBI_GetLunList: Lun
allocation failed for LunId
%d
41994
QLFC_Login: VpIndex (%d) out
of range
41995
QLFC_Login: VP Index 0x%x
not configured
42002
QLFC_Login: Can't open
connection
42024
QLFC_Logout: No active path
to device. WWPN:
%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X
268 iSCSI and iSCSI/FCoE module log messages
App Error Failed to allocate an object for Set Port Info IOCTL
processing: PortType: 0 = FC, 1 = iSCSIPortId: 0 =
FC1 or iSCSI1(GE1), 1 = FC2 or iSCSI2 (GE2)
App Error Inquiry command failed. The Inquiry command was
issued by the module as part of its discovery
process.
App Error Pass-Through command for Inquiry command for
page 83 failed. The Inquiry command was issued
by the module as part of its discovery process.
App Error Pass-Through command for Read Capacity
command failed. The Read Capacity command was
issued by the module as part of its discovery
process.
App Error Read Capacity command failed. The Read Capacity
command was issued by the module as part of its
discovery process.
App Error Pass-Through command issued by management
application (such as GUI) was aborted.
App Error Pass-Through command issued by management
application (such as GUI) failed due to invalid
command descriptor block (CDB) length.
App Error Pass-Through command issued by management
application (such as GUI) failed due to invalid data
length.
App Error Pass-Through command issued by management
application (such as GUI) was interrupted or timed
out.
App Error IOCTL operation unsupported. Operation code
provided in log message.
App Error Report LUNs command failed. The Report LUNs
command was issued by the module as part of its
discovery process.
App Error Report LUNs command failed with check condition
status. The Report LUNs command was issued by
the module as part of its discovery process.
App Error Failed to allocate LUN object; out of resources.
App Error Login attempted using FC virtual port (VP) index that
is out-of-range (range = 0–31). Index reported in
log message.
App Error Login attempted using FC VP index that has not
been configured. Operation attempted on an
unconfigured VP.
App Error Attempting login but FC connection cannot be
opened.
App Error Attempting logout of device for which there is no
active path (WWPN not found).