Show CHAP
Displays CHAP configuration for iSCSI nodes.
Authority
Syntax
Example:
MEZ50 <1>(admin) #> show chap
The following is a list of iSCSI nodes that have been configured
with CHAP 'ENABLED':
Type iSCSI Node
-------- ------------
Init iqn.1991-05.com.microsoft:server1
Show FC
Displays FC port information for the specified port. If you do not specify a port, this command
displays all ports.
Authority
Syntax
Keywords
Example 1:
MEZ75 (admin) #> show fc
FC Port Information
---------------------
FC Port
Port Status
Port Mode
Link Status
Current Link Rate
Programmed Link Rate
WWNN
WWPN
Port ID
WWNN
WWPN
Port ID
WWNN
WWPN
Port ID
WWNN
WWPN
Port ID
Firmware Revision No.
Frame Size
Execution Throttle
Connection Mode
FC Port
Port Status
Port Mode
Link Status
Current Link Rate
Programmed Link Rate
WWNN
WWPN
224 Command reference
None
show chap
None
[port_num]
show fc
[port_num]
Identifies the FC or FCoE port to display.
FC1
Enabled
FCP
Up
4Gb
Auto
20:00:00:c0:dd:00:00:75 (VPGROUP_1)
21:00:00:c0:dd:00:00:75 (VPGROUP_1)
00-00-ef (VPGROUP_1)
20:01:00:c0:dd:00:00:75 (VPGROUP_2)
21:01:00:c0:dd:00:00:75 (VPGROUP_2)
00-00-e8 (VPGROUP_2)
20:02:00:c0:dd:00:00:75 (VPGROUP_3)
21:02:00:c0:dd:00:00:75 (VPGROUP_3)
00-00-e4 (VPGROUP_3)
20:03:00:c0:dd:00:00:75 (VPGROUP_4)
21:03:00:c0:dd:00:00:75 (VPGROUP_4)
00-00-e2 (VPGROUP_4)
5.01.03
2048
256
Loop
FC2
Enabled
FCP
Up
4Gb
Auto
20:00:00:c0:dd:00:00:76 (VPGROUP_1)
21:00:00:c0:dd:00:00:76 (VPGROUP_1)