qsrIsInitStatus
Syntax
Access
Description
qsrIsInitOsType
Syntax
Access
Description
qsrIsInitChapEnabled
Syntax
Access
Description
LUN table
These tables contain information about the logical unit number (LUN) list.
qsrLunTable
Syntax
Access
Description
qsrLunEntry
Syntax
Access
Description
The QsrLunEntry contains of following sequences of objects.
qsrLunWwuln
qsrLunVendorId
qsrLunProductId
qsrLunProdRevLevel
qsrLunSize
qsrLunState
Integer:
1 = unknown,
2 = loggedIn,
3 = loggedOut,
4 = recovery
Read-only
Status of the iSCSI initiator, that is, whether or not it is logged in to the module.
SnmpAdminString
Read-only
The type of the iSCSI initiator's operating system.
Integer: 0 = enabled; 2 = disabled
Read-only
A value indicating whether CHAP is enabled or not for this iSCSI initiator.
SEQUENCE OF QsrLunEntry
Not accessible
A list of the LUNs on the FC targets discovered by the module. There are as
many entries in this table as there are FC targets on the module.
QsrLunEntry
Not accessible
Each entry (row) contains information about a specific LUN. This table extends
scsiDscLunTable in QLOGIC-SCSI-MIB. The entries in this table show
other attributes of the LUN.
PhysAddress
SnmpAdminString
SnmpAdminString
SnmpAdminString
Unsigned32
INTEGER
Management Information Base 257