1.
Check the box for Multipath I/O in the Add Features page
Figure 32 Add Features page
2.
Click Next and then click Install.
3.
After the server reboots, add support for iSCSI Devices using the MPIO applet (see
Figure 33 (page 90)
NOTE:
devices checkbox.
Figure 33 MPIO Properties page before reboot
90
iSCSI or iSCSI/FCoE configuration rules and guidelines
and
Figure 34 (page
You must present a virtual disk to the initiator to enable the Add support for iSCSI
(Figure 32 (page
91)).
90)).