HP EVA P6000 User Manual page 166

Table 23 Error Messages (continued)
Status code value
45
Not DR group member
46
Invalid DR mode
47
The target DR member is in full
copy, operation rejected
48
Security credentials needed.
Please update your system's ID
and password in the Storage
System Access menu.
49
Security credentials supplied
were invalid. Please update your
system's ID and password in the
Storage System Access menu.
50
Security credentials supplied
were invalid. Please update your
system's ID and password in the
Storage System Access menu.
51
Storage system connection down
52
DR group empty
53
Incompatible attribute
54
Vdisk is a DR group member
55
Vdisk is a DR log unit
56
Cache batteries failed or missing.
57
Vdisk is not presented
58
Other controller failed
166 Error messages
Meaning
The operation cannot be performed because
the virtual disk is not a member of a
Continuous Access group.
The operation cannot be performed because
the Continuous Access group is not in the
required mode.
The operation cannot be performed because
at least one of the virtual disk members is in
a copying state.
The management software is unable to log
in to the storage system. The storage system
password has been configured.
The management software is unable to login
to the device. The storage system password
may have been re-configured or removed.
The management software is already logged
in to the device. (This message is
informational only.)
The Continuous Access group is unable
communicate to the remote site.
No virtual disks are members of the
Continuous Access group.
The request cannot be performed because
one or more of the attributes specified is
incompatible.
The requested operation cannot be
performed on a virtual disk that is already
a member of a data replication group.
The requested operation cannot be
performed on a virtual disk that is a log unit.
The battery system is missing or discharged.
The virtual disk member is not presented to
a client.
The other controller failed during the
execution of this operation.
How to correct
Configure the virtual disk to be a
member of a Continuous Access group
and retry the request.
Configure the Continuous Access
group correctly and retry the request.
Wait for the copying state to complete
and retry the request.
Use the management software to save
the password specified so
communication can proceed.
Use the management software to set
the password to match the device so
communication can proceed.
No action required.
Verify that devices are powered on
and that device hardware connections
are functioning correctly. In particular,
validate that the inter-site link is
functioning correctly.
Add one or more virtual disks as
members and retry the request.
Retry the request with valid attributes
for the operation. Currently, this error
code is only used for mirror clone
operations, and is returned when a
fracture or invert is requested and all
operations are not alike.
Remove the virtual disk as a member
of a data replication group and retry
the request.
No action required.
Report the error to product support.
The virtual disk member must be
presented to a client before this
operation can be performed.
Retry the operation once controller
failout is complete.