HP EVA P6000 User Manual page 176

Table 23 Error Messages (continued)
Status code value
201
No Path To DR Destination
202
Nonexistent Group
203
Invalid Asynch Log Size
204
Reserve Asynch Log Capacity
205
Not In Synchronous Mode
206
Instant Restore In Progress
207
Mirror Clone
208
Mirror Clone Synchronizing
209
Has Mirror Clone
210
Invalid Remote Node
21 1
Incompatible Instant Restore
Node
212
The DR Group Is Not Suspended
213
Snap Tree Mismatch
214
Original Logical Disk
215
LDAD Downgraded
216
Insufficient Quorums
217
Already Complete
218
Maintenance Mode
219
Deleting Invalid Snapshots
220
Temporary Sync Set
221
Max Instant Restores
176 Error messages
Meaning
Attempt to create a data replication group
failed because of a loss of communication
with the remote site.
This error is no longer supported.
This error is no longer supported.
Failed to reserve additional space for data
replication log disk capacity.
Data replication operation attempted while
in asynchronous mode.
An instant restore operation is in progress
on this virtual disk (or another related virtual
disk).
Cannot perform this operation on a mirror
clone device.
Cannot perform operation while mirror clone
is resynchronizing.
Cannot perform operation because device
or associated device is a mirror clone.
This error is no longer supported.
Cannot perform Instant Restore operation
because device or associated device is a
mirror clone.
Cannot perform an Instant Restore operation
because data replication group is NOT
suspended.
Cannot start an Instant Restore operation
because the virtual disks are not in a
Business Copy sharing relationship.
Cannot start an Instant Restore operation on
the original virtual disk.
The drive is in the process of regenerating ,
reverting, or missing.
Not enough quorum disks for redundancy
to do drive code load.
The requested operation has already been
completed.
A drive is in maintenance mode.
A drive or associated drive in the tree which
is a snapshot is being deleted.
A data replication device is transitioning
from async/sync or sync/async.
Maximum Instant Restores in progress. Need
to wait for one to finish.
How to correct
Verify/re-establish communication to
the remote site.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Change data replication group
asynchronous mode and retry
operation.
Retry request later (after instant restore
has completed).
No action required.
No action required.
No action required.
Report the error to product support.
No action required.
Suspend data replication group and
retry operation.
Report the error to product support.
Report the error to product support.
Retry the request later.
Report the error to product support.
No action required.
Take drive out of maintenance mode
and retry command.
Retry the request later.
Retry the request later.
Wait for an Instant Restore to finish
then retry the request.