Practice (Connecting Three Patterns) - Brother Quattro 6000D User Manual

e
The operation is finished when "OK" appears.
If "NG" appears, remove the sticker, and then
follow the on-screen instructions to repeat
steps 3 and 4 of Step
to set the position are not successful, contact
your nearest Brother dealer.
f
Remove the sticker, and then turn off the
machine.
Note
• When using the camera to connect patterns, use the
needle that was installed when the camera needle
position was set.
14
d
. If multiple attempts

Practice (Connecting Three Patterns)

In order to practice aligning pattern edges by using the
camera, we will connect three patterns as shown
below.
A : First pattern
B : Second pattern
C : Third pattern
a
Press in the Embroidery Edit screen,
select the pattern shown below, and then
press .
b
Thread the machine with the upper thread
and the bobbin thread.