Brother Quattro 6000D User Manual page 29

d
Press
e
Press .
f
Select the reference edge and reference point
for connecting this pattern to the next one.
Press
a
Reference edge and reference point of first pattern
Note
• Be sure to rotate the pattern from the pattern editing
screen. The reference edge and reference point are
specified along the smallest rectangle (not angled)
that contains all patterns selected when the sewing
screen is displayed.
• Pressing
angle at which patterns are connected.
28
to display the sewing screen.
.
in the sewing screen changes the
g
Refer to steps
(Connecting Three Patterns)" to embroider
the first pattern and rehoop the fabric.
h
Select the next pattern, and then continue to
the sewing screen.
i
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, select the
reference edge and reference point
corresponding to those for the first pattern,
and then press
a
a
Reference edge and reference point
j
Continue with step
(Connecting Three Patterns)" to finish
connecting the patterns.
g m
through of "Practice
.
p
of "Practice
a