Brother Quattro 6000D User Manual page 35

d
After the pattern is sewn, remove the fabric
from the frame, and then measure the
distance that the pattern is to be slid.
a
Vertical: 32.8 mm
b
Horizontal: 42.8 mm
■ Trial Sewing
Sew trial embroidery to check that the pattern will be
slid the correct distance.
a
Select the pattern, and then continue to the
sewing screen.
b
Press in the sewing screen.
c
Select the reference edge and reference point
for connecting this pattern to the next one.
a
Reference edge and reference point of first pattern
34
d
Refer to steps
(Connecting Three Patterns)" to embroider
the first pattern and rehoop the fabric.
e
Select the next pattern, and then continue to
the sewing screen.
f
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, select the
reference edge and reference point
corresponding to those for the first pattern.
a
a
Reference edge and reference point
g m
through of "Practice
a