Connecting Character Patterns - Brother 885-V35 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Connecting character patterns

If the character pattern is too long to fit in the
embroidery frame, follow the steps below.
Example: Connecting "ABC" with "DEF"
a Enter "ABC" and press
b Press to turn off the automatic thread
cutting ( ).
c Press (Back key).
d Press .
e Press .
164
f
.
g
h
i
j
k
Press to turn it to
The stitching starting point is set to lower left
of the design.
Lower the presser foot, and then press
(Start/stop switch) to begin sewing.
When embroidering is finished, trim the thread
leaving the end of the thread longer than
usual. Then reset the fabric in the embroidery
frame, in a position where you can sew "DEF".
a
a Embroidery start position
b Embroidery end position
Enter "DEF" and press
Press .
Press to turn it to
The stitching starting point is set to lower left
of the design.
.
b
.
.