Brother Quattro 6000D User Manual page 11

c
Use
will align with the thread mark at the end of
previous embroidery. For this example, align
the needle position with the upper center of
the next pattern. When you are finished, press
.
10
to select the needle position that
d
Use to align the needle position with
the point of the thread mark.
a
Needle position
Note
• After turning the handwheel to check the needle
position, press the "Needle Position" button to raise
the needle.
e
After aligning the needle position for the
beginning of embroidering, remove the
thread mark.
Note
• Remove the thread mark before starting to
embroider. Otherwise, the thread mark stitching may
be combined with the pattern stitching and become
difficult to remove.
a