Connecting A Dvd Player With A/V - Sony KLV-15SR1 Operating Instructions Manual

hns_a_[ ng and Cow_nec[ing theIV
Connecting a DVD Player with AN Connectors
Use this hookup if:
• Your DVD player does not have component (Y, Pm P,0 jacks.
Tip
If your DVD player has component video output connectors, for best picture quality, use the
connection described on page 16.
Disconnect all power sources before making any connections.
1 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2 Using an S VIDEO cable, connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
Rear of TV
AUDIO-R (red)_
"--S VIDEO
2
.-----YC-15V/30V
(not supplied)
DVD player
Note
To watch the pictures input from the S VIDEO input jack, set "Auto YC" to "On" in the
(Setup) menu (See page 12).
Tips
• To take advantage of the Wide Screen Modes, set the TV's aspect ratio to 16:9 on your
DVD player. For details, refer to the operating instructions supplied with your DVD player.
• Use TV/VIDEO on the remote control to switch to the DVD player input.
• If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
17