Connecting A Satellite Receiver - Sony KLV-15SR1 Operating Instructions Manual

hr_sta_[ ng and Connec[ingtheIV
Connecting a Satellite Receiver
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2 Using AUDIO and S VIDEO cables, connect the satellite receiver's AUD10
and S VIDEO OUT jacks to the TV's AUDIO and S V1DEO IN jacks.
3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the
TV's VHF/UHF jack.
Rear of TV
AUDIO-R (red) _.___
AUDIO-L (white) ,.__J
VIDEO (yellow)--_-_ .-
FS VIDEO Satellite receiver
V:'IFJUHF 8A1_
1
OUTI_ JUmqORAUOiOLV]DEO svloEo __
,._ _,--_ _% / Satellite
I _ _ _ antenna
I_F cane
v_c-_,os_os W# _ _1 ,.
(net sop_,ed)%'_J l"
YC-15V/30V (not supplied)
Note
To watch the pictures input from the S VIDEO input jack, set "Auto YC" to "On" in the
(Setup) menu (See page 12).
Tip
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead
of the S VIDEO cable.
13